View TL12W02-D_4738506.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TL12W02-D(T30)
TOSHIBA LED lamps
TL12W02-D(T30)
Surface-Mount Devices
* * * * * * * 10.5 (L) mm x 5.0 (W) mm x 2.1 (H) mm High luminous flux: 90 lm(typ.) @250 mA Color: white Topr / Tstg: -40 to 100C Reflow-solderable Standard embossed tape packing: T30 (500 pcs/reel) 24-mm tape reel Applications : general lighting
*5.0 -0.2
+0.4
Unit: mm
Polarity
1
2
10.5 0.2 8.0 7.0
LED Chip position 1.2
Cathode index 0.5
2
2.0 (1.0)
Color and Material
Part Number TL12W02-D Color White Material InGaN
1.Anode 2.Cathode
1
Absolute Maximum Ratings (Ta = 25C)
Characteristics Forward Current Power Dissipation Operating Temperature Storage Temperature Junction Temperature Symbol IF PD Topr Tstg Tj Rating 300 2.37 -40 to 100 -40 to 100 110 Unit
Tolerance : 0.15 *This size is includes burr
JEDEC
mA W C C C
4-5AY1
JEITA TOSHIBA
Weight: 0.30 g (typ.)
Note 1:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: The junction-to-ambient thermal resistance, Rth(j-a), should be kept below 25 /W so that the TL12W02-D(T30) is not exposed to a condition beyond the absolute maximum ratings. Rth(j-a): Thermal resistance from the LED junction to ambient temperature
IF - Ta
350
(mA)
300 250 200 150 100 50 0 0 20 40 60 80 100 120
Allowable forward current
IF
Rth(j-a)=25/W
Ambient temperature
Ta
(C)
1
2008-07-14
(2.3)
2.1
3.0
TL12W02-D(T30)
Electrical Characteristics (Ta = 25C)
Characteristics Forward Voltage Reverse Current Thermal Resistance Symbol VF IR Rth(j-s) Test condition IF = 250 mA VR = 4V IF = 250 mA Min 6.3 Typ. 6.8 10 Max 7.9 40 Unit V A C/W
Note 3: VF rank classification
Part Number Min TL12W02-D(T30) 1 2 Unit 6.3 6.3 7.0 Forward Voltage Typ. 6.8 V VF
Ta=25C
Max 7.9 7.2 7.9
IF
250
mA
The specification on the above table is used for VF classification of LEDs in Toshiba facility. Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Optical Characteristics (Ta = 25C)
Characteristics Chromaticity Luminous flux Symbol Cx Cy F Test condition IF = 250 mA IF = 250 mA IF = 250 mA 40 Min Typ. (Note 4) (Note 4) 90 160 Max Unit lm
Note 4: The product is tested at the following chromaticity coordinate groups. Test conditions: IF=250 mA, Ta=25C Accuracy: +/-0.01
Cx 0.315 Cy 0.290 0.275 0.330 0.350 0.305 0.290 0.350 0.370
0.38
D1
0.300 0.300 0.315
0.34 Cy
D2
0.30
Black body curve
0.330 D2 0.315 0.315 0.330
D1
0.26
0.22 0.28
0.30 Cx
0.32
0.34
2
2008-07-14
TL12W02-D(T30)
Note 5: F rank classification Ta=25C
Part Number Min TL12W02-D(T30) E F G Unit 40 40 56 80 Luminous flux Typ. 90 lm F IF
Max 160 80 113 160
250
mA
The specification on the above table is used for F classification of LEDs in Toshiba facility. Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Note 6: Caution * The product is sensitive to electrostatic and care must be fully taken when handling products. Particularly in the case that an over-voltage shall be applied, the overflowed energy may cause damage to or possibly result in destruction of the product. Users shall take absolutely secure countermeasures against electrostatic and surge when handling the product. * This product is designed as a general display light source usage, and it has applied the measurement standard that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional application (ex. Light source for sensor, optical communication and etc) except general display light source.
3
2008-07-14
TL12W02-D(T30)
TL12W02-D
IF - V F (typ.) F - IF
Ta = 25C
(typ.)
1000
10
F/ F(250mA)
Ta = 25C
IF (mA)
100
1
Forward Current
Luminous flux
10
0.1
1 4 5 6 7 8
VF (V)
0.01
9
10
1
10
Forward Current
100
IF (mA)
1000
Forward Voltage
Relative F - IF
(typ.)
10
Chromaticity Cx, Cy F
0.34
Ta = 25C
Cx,Cy - IF
(typ.)
0.33 0.32 0.31 0.3 0.29
Cx
Relative luminous flux
1
Cy
0.1 -40
-20
0
20
40
60
(C)
80
100
0
50
100
150
200
IF
250 300
(mA)
350
Case Temperature Tc
Forward Current
Radiation pattern Ta = 25C (typ.)
Wavelength characteristic (typ.) 1
Ta = 25C
0 30 30
Relative luminous flux
0.8 0.6 0.4 0.2 0 300
60
60
90
90 0 0.2 0.4 0.6 0.8 1.0
400
500
600
700
800
Wavelength(nm)
4
2008-07-14
TL12W02-D(T30)
Packaging
This LED device is packed in an aluminum envelope with a silica gel and a moisture indicator to avoid moisture absorption. The optical characteristics of the devices may be affected by exposure to moisture in the air before soldering and they should therefore be stored under the following conditions: 1. This moisture proof bag may be stored unopened within 12 months at the following conditions. Temperature: 5C to 30C Humidity: 90% (max) 2. After opening the moisture proof bag, the device should be assembled within 168 hours in an environment of 5C to 30C/60% RH or below. 3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to pink) or the expiration date has passed, the devices should be baked in taping with reel. After baking, use the baked devices within 72 hours, but perform baking only once. Baking conditions: 605C, for 24 to 48 hours. Expiration date: 12 months from sealing date, which is imprinted on the label affixed. 4. Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting. 5. If the packing material of laminate would be broken, the hermeticity would deteriorate. Therefore, do not throw or drop the packed devices.
Mounting Method
Soldering
* Reflow soldering (example)
Temperature profile for Pb soldering (example) 10 s max (*) 240C max Package surface temperature (C) Temperature profile for Pb-free soldering (example) 5 s max(*) 260C max Package surface temperature (C)
(*)
(*)
max(*) 140 to 160C 4C/s max
(*)
4C/s max(*) max(*) 150 to 180C 230C 4C/s max (*) 60 to 120 s max(*) 30 to 50 s max(*) Time (s)
4C/s max(*) 60 to 120 s max(*) Time (s)
*
* *
*
The product is evaluated using above reflow soldering conditions. No additional test is performed exceed the condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under the above conditions. Please perform the first reflow soldering with reference to the above temperature profile and within 168 h of opening the package. Second reflow soldering In case of second reflow soldering should be performed within 168 h of the first reflow under the above conditions. Storage conditions before the second reflow soldering: 30C, 60% RH (max) When any soldering corrections are made manually,a hot-plate should be used . (only once at each soldering point) Temperature of a hot plate: 150C Soldering iron: 25 W Temperature: 350C or less Time: within 3 s Do not perform wave soldering.
*
5
2008-07-14
TL12W02-D(T30)
Recommended Soldering Pattern
(mm)
Unit (mm)
7.4
3.3
3.4
0.8
Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the recommended conditions). In selecting the one for your actual usage, please perform sufficient review on washing condition, using condition and etc. ASAHI CLEAN AK-225AES: (made by ASAHI GLASS)
Precautions When Mounting
Do not apply force to the plastic part of the LED under high-temperature conditions. To avoid damaging the LED plastic, do not apply friction using a hard material. When installing the PCB in a product, ensure that the device does not come into contact with other cmponents.
Tape Specifications
1. Product Number Format
The type of package used for shipment is denoted by a symbol suffix after the product number. The method of classification is as below. (this method, however does not apply to products whose electrical characteristics differ from standard Toshiba specifications) (1) Tape Type: T30 (8-mm pitch) (2) Example
TL12W02-D (T30) Tape type Toshiba product No.
6
2008-07-14
TL12W02-D(T30)
2. Tape Dimensions
Symbol D E P0 t F D1 Dimension 1.5 1.75 4.0 0.3 11.5 1.7 Tolerance +0.1/-0 0.1 0.1 0.05 0.1 0.1 Symbol P2 W P A0 B0 K0 Dimension 2.0 24.0 8.0 5.5 11.0 2.3 Tolerance 0.1 0.2 0.1 0.1 0.1 0.1
D
P0 P2 E W t
K0
F
B0 Polarity
A0
P
D1
3. Reel Dimensions
Unit: mm
25.5 1.0 29.5 1.0 254 2.0 3-2 0.5 13 0.2 100 1.0
7
2008-07-14
TL12W02-D(T30)
4. Leader and Trailer Sections of Tape
40 mm or more (Note 1)
40 mm or more (Note 2) Leading part: 190 mm (min)
Note 1: Empty trailer section Note 2: Empty leader section
5. Packing Form
(1) Packing quantity
Reel Carton 500 pcs 500 pcs
(2) Packing form: Each reel is sealed in an aluminum pack with silica gel.
8
2008-07-14
TL12W02-D(T30)
6. Label Format
(1) Label contents Shipped products are mentioned the following contents.
P/N:
TYPE ADDC 1) xxxxxx 3) (xxxxx) 7) Use
TOSHIBA
TL12W02-D
(T30) 2) xxxxxxxx Q'TY 4) xxx 500 pcs 5)xxxx
6) E6SAH-0W1M4-06
under 5-30degC/60%RH within 168h
[[G]]/RoHS COMPATIBLE *Y3804xxxxxxxxxxxxxxxxx*
SEALED: xxxxxxxx DIFFUSED IN JAPAN ASSEMBLED IN JAPAN
Contents about Note section (Each example means the contents are different for each lot.)
Information for customers use 1) Lot code Example: 2707C2B 2) Key code Example: 12345678 3) Rank symbol Example: D2F1 Information for Toshiba use 4) Management code Example: 715 32G 5) Packing quantity Example: 500 pcs 6) Product information E6SAH-0W1M4-06 7) Storage condition after opening Use under 5-30 degC/60%RH within 168h
(2) Label location
* Reel * Carton
Tape feel direction
Label position Label position * The aluminum package in which the reel is supplied also has the label attached to center of one side.
9
2008-07-14
TL12W02-D(T30)
RESTRICTIONS ON PRODUCT USE
* Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
10
2008-07-14

▲Up To Search▲

Price & Availability of TL12W02-D

	To Download TL12W02-D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .